Parameter information of RGT EX86180PRO:

• Article number: EX86180PRO
• Product description: 1/10 electric off-road vehicle
• Product structure: RTR/four-wheel steering portal bridge version climbing vehicle
• Weight (without battery): 2.76KG
• Battery recommendation (not included): 2S-3S lithium battery or 7.2V nickel-metal hydride
• Gear ratio: 57.6:1
• Motor: RC550-8020
• Number of servos: 2P
• Steering servo: digital metal gear 15KG
• ESC: WP-1060/60A
• Bridge box: all "steel"
• Remote control/receiver: 2.4G/4CH
• Wheelbase: 313mm
• Length: 450mm
• Width: 252mm
• Chassis ground clearance: 65mm (chassis), 48mm (bridge box)
• Wheels (diameter/width): 120/45mm
• Packing size: 550*295*265mm
• Packing quantity: 1P
• Outer box specifications: 315*280*565mm (LxWxH)
• Longitudinal passing angle: 28.3°
• Approach angle: 79.5°
• Departure angle: 90°
• Main materials of the product: plastic PA/hardware/rubber/electronics

Introduction of RGT EX86180PRO RC CAR

1. RGT EX86180PRO is a remote control climbing car tailored for climbing car enthusiasts that focuses more on climbing performance. It is shipped in the fully upgraded version of RTR, with a 313 wheelbase gate bridge structure, dual servos and four-wheel steering, and a PC material pure hand-sprayed car body.
2. Most of the structures of the RGT EX86180PRO vehicle are assembled with high-quality materials such as metal and carbon fiber. There are integrated metal bridge boxes, high-hardness steel central drive shafts, high-precision metal gears throughout the vehicle, metal shock absorbers, metal front anti-collision, etc.

Description of the characteristics of RGT EX86180PRO parts

1. RGT EX86180PRO fully upgraded metal front and rear integrated axle boxes with portal axle structure, that is, a reduction gear is installed between the wheel and the axle. In addition to increasing the vehicle's ground clearance, it can also reduce the vehicle's gearbox load and improve the vehicle's passing performance.
2. RGT EX86180PRO front and rear axles are equipped with full metal gears, independent metal axle box covers, junction boxes, and CVD structure metal transmission half shafts.

What are the advantages and characteristics of RGT EX86180PRO RC CAR?

RGT EX86180PRO suspension uses adjustable coilover full metal barrel shock absorbers and red oil-sprayed springs.

RGT EX86180PRO has high-strength powder alloy gears for the reduction gearbox, metal CVD drive shaft for the reverse drive system, and high-quality bearings with sealing covers to better reduce the shaft transmission efficiency and the problem of tooth sweeping under super-strong resistance load.

RGT EX86180PRO has a 4.5mm thick carbon fiber beam, with reserved holes for modified wheelbase suspension, car shell, and bumper modification.

RGT EX86180PRO has an adjustable carbon fiber battery box, suitable for batteries of different specifications.

RGT EX86180PRO has a full metal configuration of the front bumper, trailer hook, winch seat, and left and right side bumpers.

The servo structure on the positive Ackerman angle bridge has a better climbing effect, and with the high-precision CVD structure metal half-axle, it can achieve a large steering angle of 40~42 degrees.

RGT EX86180PRO 1.9-inch wheels with dual-color simulation design and more grippy MT tires.

RGT EX86180PRO will be available to consumers in the form of RTR, equipped with a 20T RC550 super torque motor, "Haoying" WP-1060 metal gear climbing car dedicated waterproof electric speed controller, 2 front and rear 15KG full metal gear waterproof servos, the electric speed controller can support 2-3S lithium battery mode, and there is also a FSG4P-4WS 2.4 remote control designed specifically for the four-wheel steering function of this car.

What are the advantages of RGT EX86180PRO RC CAR?

1. Most of the structures of the RGT EX86180PRO are assembled with high-quality materials such as metal and carbon fiber, such as an integrated metal bridge box, a high-hardness steel central drive shaft, etc., which improves the firmness and durability of the vehicle.
2. The dual-servo four-wheel steering design of the RGT EX86180PRO enhances the vehicle's controllability and flexibility, and is suitable for climbing complex terrain.
3. Equipped with 20T RC550 high torque motor and "Haoying" WP-1060 metal gear climbing special waterproof ESC, it provides strong power output.
4. RGT EX86180PRO is specially designed for this car with FS-G4P-4WS remote control, which supports 2.4GHz remote control and stable and precise control.
5. RGT EX86180PRO has 80% metal parts, PC material pure hand-sprayed car shell, metal shock absorber, metal front anti-collision and other designs, making the vehicle more realistic and textured.

What are the disadvantages of RGT EX86180PRO?

1. RGT EX86180PRO product shipment does not include batteries, which require users to purchase and install them by themselves, adding additional costs.
2. Due to the use of a large amount of metal and high-quality materials, as well as professional configuration, the price of this model may be relatively high and is not suitable for users with limited budgets.
3. When the RGT EX86180PRO is climbing at the limit, due to the high center of gravity, it may affect the stability and extreme climbing angle of the vehicle.

Summary

RGT EX86180PRO climbing car has flexible four-wheel steering, a solid metal body, strong power, and high simulation, but it does not contain batteries and is relatively expensive.